ADS-B Sensor Stations

Jetvision ADS-B Sensor Stations

For WAM (Wide Area Multilateration), A-SMGCS (Surface Movement Guidance and Control System) in combination or as single station. ADS-B Sensor Station from Jetvision are versatile. Powerful receiver solutions for MLAT (Multilateration Mode-S, Mode A/C and ADS-B), FLARM and of course ADS-B. Robust outdoor, indoor and mobile versions available. Equipped with industrial components for a very wide temperature range and high reliability. Data transmission via Ethernet or GSM (all bands). CE approved basic equipment which covers all requirements. On customer request also individual equipment possible.

The stations are cost-effective and have been proven many times in rough customer use. Live flight tracking quality “Made in Germany” by Jetvision.

Variants

Jetvision ADS-B Sensor Stations

basic

All stations have the same basic equipment under the respective article number. Optionally the respective station is also available with FLARM receiver. When selecting the components and manufacturing, the highest priority was placed on reliability in 24/7 operation. Configurable internal monitoring of the devices and signalling via email or Zabbix agent. Password protected reset via SMS to the GSM router is possible. Please refer to the respective variant for the exact equipment.

Enclosure	☐ GFK Outdoor ☐ Rittal 30 cm x 40 cm ☐ Pelicase ☐ Trolley
Network (LAN)	☐ LTE Router MC MRL ☐ LTE Insys Miro L200 ☐ LTE Insys ECR-LW300 (with WiFi) ☐ Ethernet Switch ☐ Ethernet Switch LWL ☐ LAN RJ45 (extern)
Main Power Supply	☐ 100 V–240 V AC ☐ 12 V–48 V DC ☐ PV (BlueSolar MPPT) ☐ PoE Splitter 48V
Power Switch	☐ Remote Controlled (depending on LAN/LTE)
Battery (for PV option)	☐ 1x 12V/12Ah ☐ 2x 12V/12Ah ☐ 1x 12V/50Ah ☐ 1x 12V/200Ah ☐ Puls UF20USV
Battery Monitoring	☐ GC97
Receiver	☐ Radarcape (ADS-B) ☐ Flox (FLARM) ☐ Airsquitter (ADS-B + FLARM) ☐ Airsquitter XGPS
Narrow Band Antenna Filter	☐ ADS-B ☐ ADS-B and ext. GPS ☐ Flarm
GPS Antenna	☐ intern ☐ Puck ☐ extern ☐ ADS-B / GPS combined
LTE Antenna	☐ intern ☐ extern ☐ Puck
Wifi Antenna	☐ Puck ☐ Extermal
Bias-T	☐ ADS-B ☐ Flarm ☐ ADS-B+Flarm
HF Surge Protection	☐ Standard (N/SMA) ☐ DEHNgate
Switch Output	☐ Relais 2 Kanal
DC Surge Protection	☐ 24V (BCO CL2 BD HC10A 24)
AC Surge Protection	☐ DEHNguard
LAN Surge Protection	☐ DEHNpatch

Not all combinations are compatible with each other.

OUTDOOR

Outdoor station completely equipped with industrial components for rough 24/7 use.
Extremely robust GRP housing with DIN rails, ventilation system and mast mounting bracket.
GPS and GSM antennas installed inside. CE conform.

inDOOR

Indoor station completely equipped with industrial components for 24/7 use.
Robust metal housing with two top DIN rails for all components. The small version is without GSM router and UPS for the router, but with LAN connection.

mobile

Mobile Sensor Station completely equipped with industrial components for 24/7 use.
Robust plastic housing suitable for outdoor use. Base plate with two DIN rails for the components. Metal plate with earthing point for all inputs. CE compliant.